Efektivitas Proses Pelapisan Amilum Terhadap Biochar Sekam Padi Dengan Pupuk NPK

  • Utari Adriana Niis Atang Program Studi Teknik Kimia, Fakultas Teknik, Universitas Tribhuwana Tunggadewi Malang
  • Taufik Iskandar Dosen Teknik Kimia, Fakultas Teknik, Universitas Tribhuwana Tunggadewi Malang
  • Sinar Perbawani Abrina Anggraini Dosen Teknik Kimia, Fakultas Teknik, Universitas Tribhuwana Tunggadewi Malang
Keywords: Coating, starch, biochar, NPK

Abstract

Biochar is black charcoal rich in the element carbon (C) produced by the thermal decomposition of biomass at a relative temperature below 700°C without or with little oxygen, in a process called pyrolysis. Biochar can be used as an alternative soil repairer. In this research, biochar and NPK will be mixed because NPK is a fertilizer that contains complete nutrients. The aim of this research is to determine the effectiveness of biochar (pukchar) and NPK fertilizers coated with starch by using the coating method for agriculture. The coating is one of the materials that serve to coat and protect the particles of substances in the raw material, protecting the material from oxygen, moisture, and light. The variables used were 10%, 20% and 30% NPK fertilizer weight and 10%, 20% and 30% starch concentrations. The results obtained in this study were the highest dissolving time of 3,600 seconds, while the highest percentage of the coating was 0.7519% at a concentration of 10% NPK and 30% starch coating. The conclusion is that good quality or effective biochar is found at a concentration of 10% NPK and 30% starch coating. This is influenced by the value of the analysis where, because the higher the starch concentration and the lower the NPK concentration, the dissolving time and the resulting coating percent will be higher.

References

Lehmann J & S Joseph (2009). Biochar for Environmental Management: Science and Technology. Earthscan-UK.

Gani, A. (2009). Potensi arang hayati biochar sebagai komponen teknologi perbaikan produktivitas lahan pertanian. Iptek Tanaman Pangan, 4(1).

Yenni Afri,dkk.2012. Pembuatan Slow Release Fertilizer Dengan Menggunakan Polimer Amilum Dan Asam Akriat Serta Polivinil Alkohol Sebagai Pelapis Dengan Menggunakan Metode Fluidizedbed. Semarang: Jursan Teknik Kimia, Fakultas Teknik, Universitas Diponegoro.

Yenni Afri,dkk.2012. Pembuatan Slow Release Fertilizer Dengan Menggunakan Polimer Amilum Dan Asam Akriat Serta Polivinil Alkohol Sebagai Pelapis Dengan Menggunakan Metode Fluidizedbed. Semarang: Jursan Teknik Kimia, Fakultas Teknik, Universitas Diponegoro.

Bakri Bakri. 2009. Komponen Kimia Dan Fisik Abu Sekam Padi Sebagai Scm Untuk Pembuatan Komposit Semen. Universitas Hasanuddin.

Danarto, Y. C., Nur, A., & Kuncoro, N. D. (2010). Pengaruh Waktu Operasi Terhadap Karakteristik Char Hasil Pirolisis Sekam Padi Sebagai Bahan Pembuatan Nano Structured Supermicrosporous Carbon. Pengaruh Waktu Operasi Terhadap Karakteristik Char Hasil Pirolisis Sekam Padi Sebagai Bahan Pembuatan Nano Structured Supermicrosporous Carbon.

Lehmann J & S Joseph (2009). Biochar for Environmental Management: Science and Technology. Earthscan-UK.

Mawardiana., Sufardi., E. Husen. 2013. Pengaruh Residu Biochar Dan Pemupukan NPK Terhadap Sifat Kimia Tanah Dan Pertumbuhan Serta Hasil Tanaman Padi Musim Tanam Ketiga. Jurnal Konservasi Sumberdaya Lahan. Universitas Syiah Kuala. Banda Aceh.

Hutapea, S. 2015. Utilization Of Rubber Seed Shells And Epicarp Wastes As Activated Biochar. Journal Of Chemistry And Material Research, Vol. 7.

Yenni Afri,dkk.2012. Pembuatan Slow Release Fertilizer Dengan Menggunakan Polimer Amilum Dan Asam Akriat Serta Polivinil Alkohol Sebagai Pelapis Dengan Menggunakan Metode Fluidizedbed. Semarang: Jursan Teknik Kimia, Fakultas Teknik, Universitas Diponegoro.

Published
2020-10-17